Well yesterdays arrival of a spanking pair of Michelin Anakee 3’s makes the total number of tyre types fitted to the Capo a head spinning …… 5. The OEM fit Tourance, oodles of TKC80’s and Karoo 3’s and one fantastic set of Anakee 2’s. They were by far the best with excellent grip and long life – so the Anakee 3’s have a hard act to follow, I wonder how they’ll compare.
With the back wheel dropped out, I decided to give everything a once over and quick scrub-up – nice and shiny like. The vernier showed the rear disk had finally met the minimum thickness (4.5mm), so off it came and on went a nice almost-new one from an 07 bike …. a floater instead of fixed. Now I must admit to being more than a little perplexed at what the hell Aprilia were thinking about when making the rear a floater – front yes, but rear! What for, where’s the benefit? With 74,710 miles on it, I can’t ever remember riding around thinking ‘damn this bike’s just screaming out for a floating rear disk’ But in the end, it’s what I had in my sack of goodies, so it’s what went on. With the rear done, the fronts looked a little sorry for themselves, so I pulled them off and gave them a once-over and spring re-tension …… I must say they do look rather nice again!
Rear wheel bearings, seals and cush rubbers are original and all in perfect condition, so the spares can stay in the cupboard for a while longer yet. The front bearings and seals that I replaced back in 2009 (@11,700 miles) are also fine – packing the void between the bearings and seals to prevent water getting trapped seems to work wonders! So now she’s all buttoned up and a final wipe with a soft cloth and ACF50 to fend off the corrosion gremlin should do the trick nicely.
Having chipped away through almost 1/3 of the parts I got last week, I started on the speedo sensor …… unfortunately t’was deader than a Dodo. That presented the perfect opportunity not only to measure it for posterity – but to strip it apart and see exactly how it was constructed. In this case as you can see from the photograph, the sensor (Honeywell 1GP7001) is completely buggered and split at the sensor head …. marks in the body suggest it may have been water damage.
All this leads to the idea of a re-usable speedo sensor, that could be re-orientated for use not only on the Capo, but also the RSV and Tuono. Here’s a MK1 idea using the same Honeywell sensor (about £15/€20) and a few nice stainless screws for that macho-Meccanno look! The idea is that if the sensor subsequently fails, you simply unscrew the case top and solder in a new sensor – bingo! Back in business in 10 minutes flat. 🙂
So is it worthwhile following this up do you think, or should I resign it to – nice idea but ……?
And lastly, the chap in l’Aquila got back to me this week and offered me this pair of little beauties for €50 plus postage. 😀
Apparently the tyre is original and will require removal with dynamite or a thermic lance and the rim has a little scuff damage along the edge (about 5 o’clock in the pic), but I’m sure that can be taken out by someone more competent than I. I’ll have a nosey around the UK over winter and take the wheel back over with me in spring.
When the wheel arrives I’ll model it up, then look at various colour schemes that might (or might not!) complement the fudge/biscuit paint of the Raid. – not that I’ll ever get them done, more just a ‘what if I had dosh’ excercise unfortunately.
Yes, I put my hand up; I screwed up on this one! I’m normally pretty good at keeping on top of the Capo maintenance, but this time I let the brake pad checks slip by while doing a full service a few weeks ago. So the other day I decided to drop the front calipers (Brembo P4/34 triple-bridge), took one look at the pads, swallowed … and squeaked a silent ‘bugger!’ Thankfully I could engage smug-mode as I already had a new set of pads (front & rear) hidden away in the parts-pantry after stocking up on all sorts of Capo-consumables at the back end of last year. The new pads are 7.5mm thick; with approx. 4.5mm of material ……. the best of the old ones was about 1mm on its tippy-toes. 😯 Way too close for comfort, so I took myself around the back of the barn and gave myself a jolly good talking too! 😳
Anyway that’s another job out of the way. Total mileage on the old pads worked out at 18,150, not too shabby really. And the rear? Doing fine, thanks for asking …. although by the time it’s pads are ready for a change, my guess is the disk will be as well. It measures a hairs width over the 4.5mm limit, so time to look for a replacement I think.