For the past six months the eight year old Garmin 2820 has steadily slid its digital cheese off its cracker, forgetting the date and time and generally making a meal of locating satellites. Add to that an annoying habit of swapping screens at random and it’s easy to see why it’s not my best-buddy it once was! Nope …. time for a change.
Which ties in very nicely with Manuel at Motrag.com loaning me a Capo-specific mount for the Garmin 590LM to try out. Unlike the Mad-Maxesque contraptions that Touratech supply, the Motrag unit is clean and simple …. and pretty uncomplicated. The mount consists of two parts, the ‘Base Mount‘ that bolts to the handlebar clamp (all bolts and spacers supplied) and the ‘Micro Mount’ of choice based on the GPS unit to be fitted. This is attached to the Base Mount via four rubber anti-vibration mounts, again with stainless steel screws supplied.
The 590LM comes with its own bracket for powering the unit and locking it in place, this simply bolts to the Micro Mount which provides the extra support for use in rougher terrain. When the GPS is tucked away in a bag and the ‘Zumo’ cover fitted, the mount is much less in-your-face unlike the Touratech one ……. plus a lot less angular, aggressive and sharp-edged, which is no bad thing.
First impressions are excellent, it holds the GPS perfectly and vibration is virtually none existent, the whole thing is unobtrusive and the powder coating looks like it’ll outlive the Capo. The laser cut ‘Rally-Raid’ is a nice touch and just so no-one feels left out – the mount is available with ‘Caponord’ as well! As always, where possible Manuel supplies stainless steel fasteners that match the look of the OEM Aprilia fasteners – a nice touch. Currently Motrag have Micro Mounts for the Garmin 340/350/390 and 590LM with one in development for the TomTom Rider. Base Mounts are also available for the Multistrada (2012-14) and Hypermotard (2014 on). The cost is €38.95 for the Base Mount and €63.95 for the Micro Mount. The Micro mount in supplied with a plate and clamp so it can also be fitted to a cross-bar or a Ram Mount, in which case you don’t need to buy the Base Mount.At the time of writing, I’ve done about 450 miles with the mount fitted, some on VERY poor mountain roads and everything is fine. The dashboard is still clearly visible (rider 182cm / 5ft 11inch) and the mount angle goes a long way to limiting screen-glare. I look forward to reviewing the mount along with the Motrag fog-lamp brackets in six months time when the Capo has a good few more miles and a winter under its belt.
Just when I’m done-and-dusted, the tools put away and the pannier-packing well underway with only 12hrs before leaving – Manuel’s (Motrag.com) parcel arrives with more goodies for the Capo! I really didn’t think it would be here in time, so I’d planned to fit the box-contents on my return …. but they’re here now so what the hell!
First off, a nice new left-hand lamp bracket and stronger angle-bracket with a funky new fastener – all to mount the GoPro tripod mount base. As usual, beautifully finished and perfect fit. Thanks very much for this Manuel, let’s see what the GoPro makes of it!
Next, one of Motrag’s new GPS mounts for the Rally-Raid. This one is for the Garmin 590LM and can be fitted directly to the supplied bracket or direct to the Accosoto cross-brace where the existing Touratech Garmin 2820 mount sits. Neat and unobtrusive (unlike an empty Touratech mount) it’s functional, yet simple. I’m really looking forward to trying this out (and the 590LM) in the coming weeks as the poor old 2820 has most definitely got a touch of dementia these days – it frequently forgets what day it is, or what country it’s in, bless it! More on this bracket in a later post.
And lastly, the replacement rear sprocket and DID drive chain. A nice slotted-steel sprocket from ‘France Equipement’ in black. I must admit to having never heard of them before, but fit is fine and the finish seems solid enough, so we’ll see what the miles make of it. The ZVM-X (in Gold/Gold) chain is the replacement for the ZVM² that has been on for a staggering 53,400 miles ….. yes one chain, one rear sprocket and three front sprockets for over 53K miles, I’ve never had one last like this before. The only thing negative I can muster against it, is that all the Gold wore off years ago – nowadays it’s just a plain old silver chain!
That’s it for the new stuff but Manuel had one more nugget tucked away in the box for me – a very clean and crack-free pair of inlet rubbers! After reading my post from a few days ago he decided to slip a pair in the box to replenish the MA spares stock – cheers Manuel you are a start indeed!
I’ll end by saying that while some of these items are product testing or favours between friends, I have to make it clear that the chain and sprocket were purchased from Motrag just as anyone else can. The price is extremely competitive and shipping very quick – so next time you’re in need of bits for your bike (not just Caponords), consider having a look at Motrag.com or emailing Manuel to see if a fellow owner/rider/engineer can help you out, I know I’d rather put a few Euro’s his way than in the pocket of some faceless multi-corporation any day of the week.
Wow what a whirlwind learning curve the last two days have been. Thanks to a Brain that (unusually) suffered the minimum of ‘Blue Screens’ and a patient wife who put up with all the muttering, mumbling and furtive running to and fro I now have a datalogger that is receiving info from the GPS and adding it to the log.
No doubt, chicken feed – a mere stroll in the park to any reading programmers …. me, I’ve taken out a lifelong subscription for Anadin! So, deep breath, sink a beer and pencil out the next step ……. I’m starting to get a liking for this digital-crochet lark!
I’ll try and get a snippet of video to post up so you can see it working ….. or crashing, whatever it decides!